BULLET SEATING DIES

Mighty Armory Bullet Seating Dies are reloading dies used for seating the bullet into the brass case when reloading ammunition for pistol calibers. Our seating dies are precision engineered and easy to set up and adjust. The seating die bullet barrel is machined for each caliber bullet. 

The Mighty Armory Bullet Seating Die is a unique design that seats the bullet into the case mouth with a steel bore barrel. The advantage of using a bore, rather than stem, is that it will not scar your bullet, thus will not alter the bullet coefficient once fired. 

While the bullet is being seated, the die will hold the bullet perfectly vertical within the case mouth. The bore of the bullet barrel will also fold back the case flare up to 80%. The resulting bullet tension creates less flare contact or pressure on the taper crimp die, which will set you up pre-crimp. 

Our bullet seating dies are modular designs. Simply swap out the barrel with an alternative caliber barrel of your choice.

The advantages of using the Mighty Armory Bullet Seating Dies are plenty! Eliminate case bulge. Prevent bullet scarring. Achieve accurate COL. Enhance the consistency and reliability of your reloads for overall performance on your reloading press and at the range.