Two dies. Total control.
The Mighty Armory 9mm Carbide 2-Die Set combines true full length carbide sizing and crimp to deliver SAAMI spec 9mm ammo that feeds cleaner, chambers smoother, and shoots more consistently.
Built for reloaders who care about feel, alignment, and real-world performance, this bundle gives you the two most critical operations in pistol reloading, engineered to work together as a measured system.
Precision starts at sizing. Reliability finishes at the crimp.
This 2-die bundle gives you the core of a true SAAMI spec 9mm reloading set.
The Mighty Armory 9mm Carbide Full Length Sizing & Decapping Die is the first of its kind ever introduced to the reloading world. Unlike traditional carbide ring inserts, this die has full length carbide bore hydraulically pressed into the die body and steel-wrapped for strength. This delivers 100% concentric, full length sizing from the top to base of the case, similar to a rifle sizing die.
Once the bullet is seated, the Mighty Armory 9mm Carbide Taper Crimp Die tapers the cartridge case back to SAAMI spec angle, providing uniform tension around the circumference of the bullet. This prevents bullet setback, improves feeding geometry, and locks in consistent chamber fit.
Together, these two dies form the foundation of Mighty Armory’s measured system ensuring your ammo is sized, aligned, and finished correctly before it ever hits the magazine.
Expect real-world gains:
-
Smoother feeding from magazines
-
Proper chamber fit with fewer failures
-
Correct bullet tension
-
Cleaner powder burn
-
Reduced smoke and felt recoil
-
Lower ES & SD (single-digit SD is achievable with proper load development)
-
Brass that lasts longer for more reload cycles
Why Reloaders Choose This 2-Die Carbide Set
✔ True Full Length Carbide Sizing (Not a Ring Insert)
Sizes the entire case body for consistent chamber fit and feeding reliability.
✔ SAAMI Spec Geometry – Sized & Crimped to Match
The crimp die matches SAAMI spec angle to the sizing operation for uniform case geometry.
✔ No Spray Case Lube Required
If you prefer lube, choose Mighty Armory Water Soluble PEG75 lanolin. Dries clean with no greasy residue.
✔ Carbide Taper Crimp Prevents Bullet Setback
Uniform circumferential tension helps maintain OAL and pressure consistency.
✔ Progressive, Turret & Single-Stage Press Compatible
Designed to run smoothly on a Dillon, Mark 7, and other standard presses.
✔ Built for Strength & Longevity
Hydraulically pressed carbide bore, steel-wrapped base, hardened tool steel construction, micro-polished for ultra-smooth operation.
Recommended Measured Setup (9mm)
For best results using the Mighty Armory measured system:
This ensures proper bullet tension, feeding angle, and chamber fit.
Construction & Design
-
100% precision CNC machined
-
Hardened, heat-treated tool steel
-
Steel-wrapped carbide bore for maximum durability
-
Internal stop wall for identical sizing across all dies
-
Tool-free modular design
-
Micro-polished for smooth press feel
See, Feel and Shoot the Difference with Mighty Armory Precision Reloading Dies.
