Mighty Armory Gold Match TNT 38 Special, 357 Magnum Full Length Sizing Decapping Die
Mighty Armory Gold Match TNT 38 Special, 357 Magnum Full Length Sizing Decapping Die
Mighty Armory Gold Match TNT 38 Special, 357 Magnum Full Length Sizing Decapping Die
Mighty Armory Gold Match TNT 38 Special, 357 Magnum Full Length Sizing Decapping Die
Mighty Armory Gold Match TNT 38 Special, 357 Magnum Full Length Sizing Decapping Die

Mighty Armory Gold Match TNT 38 Special, 357 Magnum Full Length Sizing Decapping Die

Mighty Armory Gold Match TNT 38 Special, 357 Magnum Full Length Sizing Decapping Die

Mighty Armory

Regular price $139.95
Regular price Sale price $139.95
Sale Sold out
Mighty Armory TNT 38 Special, 357 Magnum Full Length Sizing Decapping will size to SAAMI spec a .356 to .357 bullet diameter. The Mighty Armory TNT "Tighter Neck Tension" Sizing Decapping die is a ...Read more
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Product Description

Mighty Armory TNT 38 Special, 357 Magnum Full Length Sizing Decapping will size to SAAMI spec a .356 to .357 bullet diameter.

The Mighty Armory TNT "Tighter Neck Tension" Sizing Decapping die is a cutting-edge design that offers full length, concentric sizing to SAAMI spec angles from the base of the case to the mouth. The extended, full length sizing area helps to prevent under-sizing or over-sizing at the neck, shoulder and base. Expect the benefits of smooth feed from magazines, easy feed into chamber, correct case pressures, correct bullet tension, cleaner burning powder, increased accuracy, and your brass will last longer for more reloads. Chronographs will prove SDs will be single digits. Now you can load your rounds to spec with every lever pull. Results will be better than factory sized loads!

The TNT design will allow you to adjust the die for bullet diameter and length. Tool free, quick and easy setup and you're good to go. Perfectly size rounds in SAAMI spec with the correct bullet tension.

*All pistol sizing dies include the Mighty Armory primer flicker cap and two (2) M2 hardened steel .078 decapping pins.

We highly recommend pairing with the Mighty Armory Flare Expander Reloading Dies and Mighty Armory Taper Crimp Reloading Dies for best results. 

Innovation for today’s volume reloaders and shooters that load for accuracy.

Mighty Armory specs and steels are far superior to all others. You’ll see when you open the white box and experience it at the press and on the range.

The TNT Gold Match is the perfect die. We anticipate 1,000,000 sizing's before any wear shows. Keep on sizing!

Load to powder data. Shoot cleaner and more accurate.

  • Full length, concentric sizing.
  • 100% Precision CNC machined.
  • Made in the USA.
  • Includes a primer flicker spring cap to prevent primer pullback while decapping.
  • 5 Bore Finish.
  • Modular design, no tools needed
  • No insert to loosen or crack. 
  • Sizes to spec. Huge advantages.

“Get Tough Stay Mighty”

  • "Worlds Toughest" Reloading Dies
  • Precision Reloading Tool
  • Made in the USA

Mighty Armory

What's Included

Popular Questions

Is lube required on the TNT Gold Match Die?

Yes. For all steel dies, you must not forget to lube your cases.

Instructions

Pistol TNT Gold Match Sizing Die Instructions

Step 1: Clean die bore before use. First clean the bore with alcohol on a q-tip or paper towel. Then wipe the bore dry with a q-tip or paper towel.

Step 2: Screw the pin into the shaft about half-way. Use purple vibra-TITE 111 on the threads. This will prevent the pin from backing out of the shaft, which can cause problems. Use a 3/16" wrench to hold the flats of the shaft and snug the pin into place. Vice it with rubber grips to prevent scarring of the shaft. Do not overtighten the pin into the shaft – just snug it. The vibraTITE will do the rest.

Step 3: Drop shaft into the well. Add the primer flicker spring into the cap well. Screw on the cap all the way down snug against the o-ring, then back out the cap ¼ turn so that it can work properly. This will prevent primer pull back. You will hear the Flick or Snap of the primer while in use.

Step 4: Turn the die into your press tool head until the die mouth makes contact with the plate or shell holder. Depending on your press, you can back out the die ¼ turn.

Step 5: Lock the die into place.

Keep your die bore and body well oiled when not in use. DO NOT USE AEROSOL LUBE PRODUCTS ON MIGHTY ARMORY DIES. We recommend the use of a quality case lube, which will reduce heat and decrease pressure.
For autoprogressive, autodrive / automated presses, spray on a mix of 6oz 91% alcohol and 1oz PEG75 Lanolin. Spray cases completely, let dry for 30 minutes. PEG75 is water based and wipes away with ease. 
We recommend imperial wax on cases when reloading on single stage and turret presses.

View full details
Mighty Armory Gold Match TNT 38 Special, 357 Magnum Full Length Sizing Decapping Die Mighty Armory Gold Match TNT 38 Special, 357 Magnum Full Length Sizing Decapping Die

Mighty Armory Gold Match TNT 38 Special, 357 Magnum Full Length Sizing Decapping Die

Regular price $139.95
Regular price Sale price $139.95
Sale Sold out

SAAMI Spec Sizing

Full length sizing bore sizes the case to SAAMI spec angles and sets the case diameters to load performance rounds with our full set of reloading dies.

Primer Flicker Decapping

Trouble-free decapping with the primer flicker cap and spring and toughest decapping pins in the reloading industry. Easily flicks primers down your reloading press chute with each stroke.

Unmatched Concentricity

Mighty Armory reloading dies are precision machined with the best tool steel in the industry to ensure perfect concentricity and consistency in every reloading die. Mighty Armory shafts and pins are centered to meet the demands needed for accuracy in your precision reloaded ammo.

MIGHTY ARMORY

PRECISION MACHINED

All reloading dies are precision CNC machined for tight tolerances and perfect vertical alignment. You will immediately see, feel and shoot the difference with Mighty Armory Reloading Dies.

Learn More

SUPERIOR MATERIALS

We machine our reloading dies from high-grade, hardened tool steel built to withstand the pressures from automated and lever presses. Our dies are designed and built with quality materials to last a lifetime on your press.

Learn More

MADE IN AMERICA

Our goal at Mighty Armory is absolute quality products and customer service. We take pride in our innovative designs and precision machining. We don't believe in cutting corners and don't mass produce. American craftmanship is at the heart of our business.

Learn More

;